SMALTO EPOSSIDICO SATINATO
Smalti
Enamel based on epoxy resins with satin finishing, excellent resistance to salts, water, diluted acids and alkalis. Suitable for painting of iron manufactures; plant and equipment of chemical, mechanical and petrochemical industries, plasters, reinforced concrete and light alloys properly prepared
Specifications
Specific gravity | 1.350 ± 0.100 kg/lt |
Composition | chlorinated rubber alkyd |
Recommended film thickness per coat | 40-50 μ |
Dried product appearance | satin (20-35 gloss) |
Mixing ratio | catalyze to 20% by weight or 27% by volume using Catalizzatore Epossidico Universale (Caf) |
Pot life at 20°c | 10 – 12 hours |
Application | spray, roller, airless |
Dilution | 5% approx. Diluente Universale (Caf) |
Yield | 7-8 sqm/lt, 1 coat |
Drying time | 8-10 hours, hardened in depth 24 hours |
Recoat | 12-24 hours under normal conditions of temperature and humidity, but no later than 48 hours to allow a better grip |

16 L – 4 L
Protect from frost
RAL colors
Use nitro thinner
immediately after use